Type:
- GLEASON for roughing or finishing (es. type RIDG-AC, type ROUG-AC, type STD, type HARDAC, etc.)
- For bevel gear spiroidal system with spare tools bars blades type OERLIKON and type GLEASON RSR.
| DESCRIPTION * | Ø FRESA | TYPE FEATURE |
N° PCS. | CODE | MATERIAL |
|---|---|---|---|---|---|
Oerlikon type blades |
7.5 x 9 x 100 | IA | HS 6-5-2-5 | ||
| 13.5 x 17 x 110 | IB | ||||
| 16 x 20 x 120 | IC | ||||
RSR type Bars |
standard | extra with | HA/HB | HS 6-5-2-5 | |
| 5" | 002/003 | 005/006 | |||
| 6" | 005/006 | 008/004 | |||
| 7.5" | 008/009 | 022/023 | |||
| 9" | 011/012 | 024/025 | |||
| 10.5" | 014/015 | 026/027 | |||
| 12" | 014/015 | 026/027 | |||
| 14" | 017/018 | 028/029 | |||
| 16" | 020/021 | 030/031 | |||
Alternate or Triplex standard soft body roughing blades |
alt. | trip. | SE/SF | HS 6-5-2 | |
| 5" | 6+6 | 3+3+6 | |||
| 6" | 8+8 | 4+4+8 | |||
| 7.5" | 10+10 | 5+5+10 | |||
| 9" | 12+12 | 6+6+12 | |||
| 12" | 16+16 | 8+8+16 | |||
| 16" | 20+20 | 10+10+20 | |||
Alternate or point diameter single-side finishing blades |
alt. | unil. | SA/SB | HS 6-5-2 | |
| 3.5" | 4+4 | 8 | |||
| 4.5" | 4+4 | 8 | |||
| 5" | 5+5 | 10 | |||
| 6" | 6+6 | 12 | |||
| 7.5" | 6+6 | 12 | |||
| 9" | 8+8 | 16 | |||
| 12" | 10+10 | 20 | |||
| 16" | 12+12 | 24 | |||
Rough AC Alternate or Triplex Blades |
alt. | trip. | SQ/SR | HS 6-5-2 | |
| 5" | 6+6 | 3+3+6 | |||
| 6" | 8+8 | 4+4+8 | |||
| 7.5" | 10+10 | 5+5+10 | |||
| 9" | 12+12 | 6+6+12 | |||
| 12" | 16+16 | 8+8+16 | |||
| 16" | 20+20 | 10+10+20 | |||
Ridg-AC Alternate or Triplex roughing blades |
alt. | trip. | SG/SH | HS 6-5-2 | |
| 5" | 8+8 | 4+4+8 | |||
| 6" | 10+10 | 5+5+10 | |||
| 7.5" | 12+12 | 6+6+12 | |||
| 9" | 14+14 | 7+7+14 | |||
| 12" | 18+18 | 9+9+18 | |||
| 16" | 20+20 | 10+10+20 | |||
Hardac type finishing blades |
alt. | unil. | SM/SN | HS 6-5-2 | |
| 5" | 6+6 | 12 | |||
| 6" | 8+8 | 16 | |||
| 7.5" | 8+8 | 16 | |||
| 9" | 10+10 | 20 | |||
| 12" | 14+14 | 28 | |||
| 16" | 18+18 | 36 | |||
Wedg-AC type blades Alternate or Triplex |
alt. | trip. | SG/SH | HS 6-5-2 | |
| 5" | 10+10 | 5+5+10 | |||
| 6" | 12+12 | 6+6+12 | |||
| 7.5" | 14+14 | 7+7+14 | |||
| 9" | 16+16 | 8+8+16 | |||
Helixform type finishing blades |
5" | 4+4 | S5 | HS 6-5-2 | |
| 6" | 4+4 | ||||
| 7.5" | 4+4 | ||||
| 9" | 4+4 | ||||
| 12" | 4+4 | ||||
| 16" | 4+4 | ||||
Parallel |
Hardened and rectified | TA | C 45 | ||
| * Revex, Coniflex, Rough-AC, Ridg-AC, Wedg-AC, Hardac, RSR, Helixform are property of Gleason Corp. | |||||